Skip to main content

Cotton fabrics with fewer yarn crossings can yield longer recycled fibers, according to a University of Leeds study examining how textile construction affects the material available for new yarn.

In laboratory tests, up to 70 percent of the recovered fiber mass from woven fabrics with fewer interlacing points remained longer than 12.7 millimeters, a threshold the researchers used to judge potential suitability for staple yarn spinning.

The research shows that fabric construction could guide both textile design and waste sorting for mechanical recycling. The percentage describes the length of fibers recovered under the study’s conditions; the team assessed spinning potential rather than producing and testing new yarn from the recycled material.

The research, published in “Waste Management,” was conducted by Sophie Rotheram, Abdul Jabbar and Muhammad Tausif of the Leeds Institute of Textiles and Colour (LITAC), a world-leading research institute at the University of Leeds School of Design

Mechanical recycling tears textiles apart to recover their constituent fibers. That process can also break the fibers, reducing their usefulness for yarn production. The study examined how choices made during spinning, weaving and knitting influence the length that survives.

The researchers produced 13 fabrics from virgin cotton, varying cotton type, yarn thickness, spinning method and fabric construction. The samples included 12 woven fabrics and one single jersey knit. None had undergone dyeing or finishing.

The researchers fed fabric squares through a laboratory shredder three times, keeping the machine settings constant. They then carded the material to separate the fibers and remove leftover yarn pieces before measuring fiber length.

Across the woven samples, fewer yarn interlacing points were strongly associated with more complete fabric opening. Twill and sateen structures also produced a smaller proportion of short fibers than the comparable plain weave. The researchers linked the differences to the resistance and friction created where yarns cross.

Coarser yarns combined with more open fabric structures reduced fiber damage. Two-ply yarns, combed yarns and extra-long-staple cotton also improved recovered fiber length in the comparisons tested.

The single jersey knit presented a different challenge. Its looped structure resisted opening and produced the shortest fibers among the samples. About 60 percent of its recovered output fell below the study’s spinning-length threshold.

That result applies to the particular knit and processing conditions tested. The jersey sample was heavier than the woven fabrics, and the study did not assess other knit constructions such as rib or interlock.

Using an industry classification matrix based on average fiber length and short-fiber content, the researchers placed most woven outputs in a fair-quality category associated with coarse, open-end yarns. The Pima extra-long-staple cotton sample produced the highest-quality output.

The authors identified further limits to applying the results to commercial waste. Dyeing, finishing, wear and laundering can change how fabrics respond to shredding, while the controlled samples were made from new, untreated cotton.

The team proposed automated systems to sort textile waste by fabric construction and yarn-crossing density. It also called for equipment that could separate recovered fibers by length at industrial scale, helping recyclers select material for different spinning methods.